14
CHAPTER
DC Power Harness
This chapter explains how to remove and install the DC power harness for a
SPARCstation 10 system.
Tools Needed
To remove and install the DC power harness you will need the following tools and
materials:
4 Phillips screwdriver (size #2)
4 Wrist strap
4 Antistatic surface
Removing the DC Power Harness
Power off the system and disconnect the expansion units. Refer to Chapter 4.
Caution -
The hard disk drive contains electronic components that are extremely
sensitive to static electricity. Ordinary amounts of static from your clothes or work
environment can destroy the components.
141