Diskette Drive; Figure 9-10 Positioning The Diskette Drive - Sun Microsystems Ultra 1 140 Service Manual

9.3 Diskette Drive

9.3.1 Removing a Diskette Drive
1. Remove the bracket from the chassis.
See Section 9.2.1, "Removing the Bracket from the Chassis," on page 6 and
Section 9.2.2, "Removing a CD-ROM/Tape Drive," on page 8.
2. Position the drive bracket on top of a flat surface as shown.
See Figure 9-10.

Figure 9-10 Positioning the Diskette Drive

3. Remove the four screws securing the diskette drive to the drive bracket.
See Figure 9-10.
4. Remove the diskette drive, and place it aside.
Storage Devices
Screws (4)
Bracket
Diskette drive
9
9-11