Install The R2 Card; Figure 11. Installing A Peripheral Resource Card - Mitel 3300 Technician's Handbook

Technician's Handbook
4. If a second PRC is required, install it in the same
manner in the top of slot 6.
Next: Go back to "Install a DSU card" on page 65".

Figure 11. Installing a Peripheral Resource Card

Install the R2 Card

The R2 card is installed in any empty DSU slot. The DSU
cabinet supplies the power for the card and provides a
message interface back to the control cabinet through
the FIM interface and the fiber optic cable.
The following section describes how to install the R2 card
and R2 interface assembly. You will need to program the
R2 card into the 3300 ICP database to allocate links and
trunks.
76