Mitel 3300 Technician's Handbook page 56

Technician's Handbook
Create a Dial-Up Network Connection on Windows
95/98
Typically, you will want to follow this procedure twice to
create two Dial-up Networking connections, one for
on-site direct access, and one for remote modem access.
16. Click the Start button, select Programs,
17. Double-click Make New Connection.
18. Enter an appropriate name for the connection (for
19. Enter an Area Code and Telephone Number and
20. Click Finish.
21. Right-click your new connection icon and click
22. Click Configure. Ensure the fields are set as follows:
38
Accessories, then Dial-Up Connections.
example, Direct for direct connections, Remote or a
customer's name for remote connections) and click
Next.
Note: If you are creating a direct connection, make sure
NT Direct Connection is listed in the drop-down list in the
Make a New Connection window.
select a Country Code from the drop-down list. Click
Next.
Note: Even though it is not needed for a direct connection,
Windows requires that you enter this information.
Properties.
• Data bits: 8
• Parity: none
For a direct connection:
• Maximum speed: 38400
• Check: only connect at this speed
• Select wait for dial tone before dialing
• Select cancel the call time at 60 seconds.