Mitel 3300 Technician's Handbook page 92

Technician's Handbook
3. Install the interface assembly (see "Install the
4. Install the PRI card (see "Install a DSU card" on
5. Configure the IMAT database.
6. Connect the IMAT PC to the PRI card (see "IMAT" on
7. Save the IMAT database onto the PRI card.
8. Connect the PRI card to the ISDN network (see
Next: Go back to "Install a DSU card" on page 65".
To connect the PRI card to the network:
1. Unpack and inspect the ISDN PRI cables. Retain the
2. Plug the ISDN PRI cable into the PRI port.
3. Plug the ISDN PRI cable into the network terminating
74
interface assembly on cards" on page 66).
page 65).
page 35).
below).
original package.
equipment.
Note: A dual-port card needs two ISDN PRI cables if you
are using both ports.