Mitel 3300 Technician's Handbook page 40

Technician's Handbook
1. From the Maintenance PC, start Internet Explorer.
2. Open the System Administration Tool:
3. In the Selection: drop-down menu on the left (when
4. Click on the System Capacity folder, then on the
5. Click the Change button, and fill-in the fields as
6. Enter the Mitel Options Password (MOP) in the
7. Reboot the Controller (press the Reset button on the
Next: Go to "Connecting the Controller to the Network"
below.
22
a. Enter the Controller's IP address in the Address
field of Internet Explorer, and press ENTER
(default IP address is 192.168.1.2).
b. Enter the ESM login username and password, and
click the OK button.
Note: The default login username and password are
system and password, respectively. To prevent security
problems, change these as soon as possible (System
Access Authorization form in ESM).
c. Click the System Administration Tool button.
The System Administration Tool opens.
it says [Click Here to Start]), select System
Configuration.
License and Option Selection form.
required (see your Mitel Options sheet).
information, click the Help button to access the System
Administration Tool's Online Help.
Note: In the Configuration Options section, we
recommend that you enable Networking Option and
Mitai/Tapi Computer Integration.
Password field, then click the Save button.
Time: The Save procedure takes a minute or so.
Controller).
For more