Mitel 3300 Technician's Handbook page 120

Technician's Handbook
Installing software (upgrading)
14. Insert the Mitel Networks 3300 ICP software CD into
15. Run the "Setup.exe" program from the CD. You see
16. Click Next to continue.
17. Read the License Agreement page, and click Yes if
18. Ensure that New Installation is selected, and click
19. Choose a location in your local FTP server for the
20. Click Next.
21. Ensure that the Read manual instructions to
102
the CD drive of the installer's PC.
the Installation Wizard Welcome page.
you wish to continue.
Next.
InstallSetup program to install files (normally this is
C:\inetpub\ftproot, which is the default FTP home
directory for an anonymous user) by completing
either of the following steps:
• Click Browse to find the location, and then click
Next to continue. You see a read-only list of the
configurations you have made, OR
• Click Next to accept the location displayed and
continue. You see a read-only list of the
configurations you have made.
If you do not get this list, your FTP server is
Note:
not installed properly. Re-install your FTP server.
If you do not have an FTP server, install the
Note:
files in c:\MN3300.
The system takes approximately 10 minutes
Time:
to copy the files to the specified location.
complete the installation check box is selected, and
click Finish. The SWinstallGuide.txt README file
opens.