Mitel 3300 Technician's Handbook page 63

6. Using ESM, program the ASU settings on the
Controller. See the System Administrator Tool Online
Help for more information.
a. Program the Analog Services Unit
Configuration form (System Configuration
section, Units/Modules folder). See the Online
Help for more information.
Note: See Appendix D on page 237 for the location of the
Controller Modules, ports and cabinets.
b. Program the applicable forms in the Analog
Trunk folder (System Configuration section,
Trunks folder). See the Online Help for more
information.
c. Universal ASU only: In the Miscellaneous
Assignment form (System Configuration
section, Music on Hold folder), program the
virtual circuit for the Tip/Ring pair used for Music
on Hold.
d. Universal ASU only: In the Loudspeaker Paging
Assignment form (System Configuration
section, Loudspeaker Paging folder), program
the zone and virtual circuit for the Tip/Ring pairs
used for Paging.
Next: Install any other required Service Unit (see
"Overview" on page 29). If all the Service Units are
installed, go to "Installing Phones and Peripherals" on
page 80.
Installation
45