Mitel 3300 Technician's Handbook page 126

Technician's Handbook
47. Click System Administration Tool, click
48. Issue the Type*.dr.logfile_1 command to display the
49. Issue the mess sub command to check the
Upgrading IP sets and forcing lease renewals
50. Log back in to ESM and issue the LOAD IPDevice 1
51. If you have an IP console, you must:
52. If the system has a Peripheral Unit with DNI Line
108
Maintenance and Diagnostics, click
Maintenance Commands, then click All.
log file created during the Data Restore.
programmed NSU links; they should be OPEN. If any
programmed links are in SCAN, check the LINK
STATUS LEDs; if the AMBER LEDs are chasing, this
means that the NSUs are writing to the RAM DISK.
to X (where X represents the last IP device number)
to upgrade the IP phones.
• Cycle the power on the IP TKB (key pad).
• Upgrade the IP Console software (if required).
cards, we recommend that you issue the Load x x x
command to load the DNI cards and ensure that the
latest DNI line load is loaded.