Viewing Logs
To view maintenance or software logs
1. Click Maintenance & Diagnostics.
2. Click Logs.
3. Select the desired log category (Maintenance or
4. Highlight the desired log by moving your cursor over
Checking Controller Hardware Profile
Use this procedure to verify the hardware installed in the
Controller:
1. In the ESM, go to the Maintenance and Diagnostics
2. To view details on the installed modules, click the
Software).
• To view all logs in the category click All
Maintenance Logs (or All Software Logs)
• To view error Logs click error
• To view warning logs click warning
• To view information click Info
it and click once.
• The details of the log will be displayed in the lower
half of the screen.
section, then the System Hardware Profile folder.
System Hardware Modules form.
To view details on the RTC and E2T, click on the
System Hardware Compute Cards form.
Verify that the IP address of the E2T is the
Note:
correct one.
Note: Slot 1 is always the RTC. For a 100-user Controller,
this form displays the details on the RTC only.
Maintenance
199