Mitel 3300 Technician's Handbook page 61

33. Click OK until you exit the windows.
To Start IMAT
1. Start IMAT (ignore any message about username
configuration error).
2. In the File menu, select Connect to Remote Site.
3. In the Dial-Up Entry box, select the connection name
you entered when creating the dial-up network
connection.
• For Windows 95/98, see Step 18 on page 38.
• For Windows 2000, see Step 28 on page 42.
Note: The R2 NSU does not require a password.
4. Ensure that the correct option (PRI CARD, R2
CARD, etc.) is selected under Remote ISDN
System.
5. Click Connect.
6. In the Connected to remote site window, click OK.
To close IMAT:
a. Save any open databases.
b. In the File menu, click Exit.
Installation
43