Technician's Handbook
Checking the System
To check the system
1. Click Maintenance and Diagnostics.
2. Click Maintenance Commands.
3. Click All.
4. Enter the following commands:
5. Click Logs.
6. Click Maintenance Logs.
7. Click Error - Checks for error logs or click ALL to see
8. Check that you have recent back-ups of the database
196
• SH ST AL Checks for system alarms. There should
be no alarms. DBMS STAT - Checks the status of
the initialized flag. If the flag is off enter DBMS Save
command.
• PROGRAMMED REBOOT DISPLAY - Displays
the scheduled system reset.
• ME S - Checks the status of all communication
links. All communication links should be open.
• PCM TO - Checks for Circuit Switch Faults. There
should be no faults.
all maintenance logs.
and hard drive.
Note: It is recommended back-ups are made at least
once a week and where possible, copies of the last 3
back-ups should be available.