Mitel 3300 Technician's Handbook page 175

15. Change the following parameters as indicated:
- Boot device : motfcc
- File name : Boot_Install
- Host inet : <the IP address of the FTP server PC
host (your PC)>
- User (u) : <user name for FTP server in PC host>
- Ftp password (pw) (blank = use rsh) : <password
for FTP server in PC host>
- Flags (f) : 0x0 (for RTC only)
16. Press the Reset button on the controller.
Time: The system takes approximately 45 minutes to
re-format the hard drive and install the software.
17. Log in to the 3300 ICP ESM using the default
username (system) and password (password). You
see the 3300 ICP ESM main tools menu.
Tip: If your login fails, it may be because the system is
not finished loading. Once you see Channel 19
initialized in the RTC (Channel 29 initialized if you
have 30 voice mail ports), you should be able to log in.
18. Set the options in the License and Option Selection
form according to your purchased Mitel options. To
set the options
• At the main tools menu, click System
Administration Tool.
• Click in the Selection: drop-down menu, where it
says [Click here to start].
• Click System Configuration, click System
Capacity, and then click License and Option
Selection. You see the License and Option
Selection view.
• Click Change in the top right corner. You see a
pop-up window.
Troubleshooting
157