Mitel 3300 Technician's Handbook page 174

Technician's Handbook
5. Run the "Setup.exe" program from the CD. The
6. Click Next to continue.
7. Read the Licence Agreement page, and click Yes if
8. Ensure that New Installation is selected, and click
9. Choose a location in your local FTP server for the
10. Click Finish when prompted. You are presented with
11. Launch your communications program that connects
12. Type reboot, and press ENTER. The 3300 Controller
13. Press a key at the Press any key to stop auto-boot
14. At [VXWorks Boot] type c, and press ENTER.
156
Installation Wizard starts, and you see the Welcome
page.
you wish to continue.
Next.
InstallSetup program to install files (normally this is
C:\inetpub\ftproot. installSetup program provides
aprogress indicator and a log file.
a text file providing instructions.
to the 3300 ICP serial port.
reboots, and a Hyperterminal window (RTC) opens
on the installer's laptop/PC. You can also reboot by
pressing the Reset button on the front panel of the
3300 Controller.
prompt. Note that you have 10 seconds to complete
this step. If 10 seconds elapse before you press a
key, the system will auto-boot.
If you miss the 10-second timeout, manually
Tip:
reset the controller by pressing the Reset button.
The RTC re-opens, and you once again have 10
seconds to complete step 13.