Technician's Handbook
CEPT Port DIP Switch Settings
Table 62 below shows the settings for the CEPT port DIP
switch. for the BRI NSU
Table 62. CEPT Port DIP Switch Settings
Switch Function
Analog Service Unit
The Analog Services Unit (ASU) provides connectivity for
analog trunks and telephones (POTS and On-Premise
Station, ONS). There are two variants of 3300 ASUs:
•
•
Peripheral Unit
Each Peripheral Unit contains peripheral interface cards
providing ONS and/or DNI ports.
244
This is site-dependant. Tx is usually,
Note:
grounded, but this depends if the remote Rx
connection is grounded or not.
1
Tx Ground
2
Rx Ground Up: Ground
ASU
Universal ASU
Figure 31. Universal ASU
Figure 32. ASU
Settings
Notes
Up: Ground
Not required for
RJ-45 connector.
Down: Floating
Not required for
RJ-45 connector
Down: Floating