Mitel 3300 Technician's Handbook page 60

Technician's Handbook
21. Use the COM Port that has been configured as a
22. In the Choose Modem box, from the drop-down list
23. Clear the box Use area code and dialing rules, and
24. For the Connection type, select PPP (Point to Point
25. For the Logon procedure, select Use logon script,
26. In the Internet account logon information box, leave
27. Dialog boxes appear that warn you that you will not
28. Enter the Connection name, and then click Next.
29. In the box to set up an Internet mail account, select
30. De-select the option to connect to the Internet
31. In the Network and Dial-up Connections window,
32. From the Maximum speed (bps) drop-down list,
42
NULL Modem connection: 38400, 8, none, 1.
select Communications cable between 2
computers. Click Next.
then click Advanced.
Protocol).
and then click Browse. Select the appropriate script
(see below), click OK, then Next.
• for PRI/QSIG: c:\program files\mitel\Imat\
pridun.scp.
• for R2: c:\program files\mitel\Imat\r2dun.scp.
the username and password fields blank and then
click Next.
be able to connect to your Internet service provider
without your user name and your password.
Disregard these warnings and click Yes on these
boxes to continue.
No, and then click Next.
immediately, then click Finish.
right-click on the new DUN connection, point to
Properties, then click Configure.
select 38400 for the baud rate.