Mitel 3300 Technician's Handbook page 59

12. From the Port speed drop-down list select 38400,
and then from the Flow control list select None.
13. Select the Advanced tab. From the drop-down
menus, set the fields as follows:
• Data bits: 8
• Parity: none
• Stop bits: 1
14. Click OK and close the Control Panel window.
Connect the Maintenance PC to an NSU
15. Connect an RS-232 straight DTE serial cable
between the NSU's serial port and the PC's serial
port.
Note: If you are connecting through a modem, use a null
modem adapter on the NSU side.
Create a Dial-Up Network Connection on Windows
2000
Typically, you will want to follow this procedure twice to
create two Dial-up Networking connections, one for
on-site direct access, and one for remote modem access.
16. Click the Start button, select Programs,
Accessories, Communications, then Dial-Up
Connections.
17. Double click Make New Connection, and then click
Next.
18. Select Dial-up to the Internet, and then click Next.
19. Select I want to set up my Internet connection
manually, or I want to connect through a local
area network (LAN). Click Next.
20. Select I connect through a phone line and a
modem, and then click Next.
Installation
41