OUTGOING CALL
REDIAL
INTERCOM CALL
ND
ANSWER A 2
CALL WHEN ON
A CALL
TRANSFER CALL
CALL PARK
CALL PARK
RETRIEVE
CALL PICKUP
PAGE
CALL FORWARD
CANCEL CALL FWD
DO NOT DISTURB
CANCEL DND
CONFERENCE CALL Establish 1
PROGRAM STATION
SPEED DIAL
TO USE STATION
SPEED DIAL
MITEL 3300
TELEPHONE QUICK REFERENCE GUIDE
Lift handset - Press 9 - Dial number
Lift handset - Press REDIAL key
Lift handset - Dial EXT. NUMBER on dialpad
Press HOLD key to put the first caller on hold - Press ringing DN Key to
nd
receive the 2
call - if needed, put 2
st
1
DN Key and you will have the 1
(With live call) Press TRANSFER key - Dial EXT. NUMBER
Announce call and/ or hang up to transfer call (if the called extension does not
want call, before hanging up, press CANCEL key to retrieve the call
and take a message)
(With live call) Press CALL PARK key – Dial EXT. NUMBER – Hang up.
Make announcement as to where the call is Parked. This Parks the call at the dialed
Ext.
Press the CALL PARK RETRIEVE button – Dial the EXT. NUMBER where the
call is parked – Press #.
Lift handset - Press CALL PICKUP button and enter the extension where call is
holding or ringing.
Lift handset - Press PAGE - Make announcement - Hang up
Press the FWD key - Dial the EXT. NUMBER to receive your calls – Press
ACTIVATE
Press FWD key – Press DEACTIVATE – Press CLOSE key
While on hook - Press DND key
While on hook - Press lit DND key
st
call – Press CONFERENCE key – Establish 2
ADD HELD – Press Flashing CALL KEY of the caller that is on hold.
Press the BLUE SETTINGS key – Press SETTINGS – Press PROGRAMMABLE
KEYS – Press the key that you would like to program – Press SPEED CALL – Enter
the information including the telephone number preceded by 9.
Press the programmed Speed Dial key to make the outbound call
Volume Control
Activates Handsfree Mode
Mutes Microphone
Opens Settings Menu
nd
caller on HOLD - Press
st
caller back.
Cancel Key
Redial Key
Hold Key
Transfer Key/ Conference
Message key—
Lights when you
have new messages.
nd
call – Press