Mitel 3300 Technician's Handbook page 249

System Capacity
The 100-user 3300 ICP will support one of the following
maximum configurations:
•
•
The 250-user 3300 ICP will support one of the following
maximum configurations:
•
•
•
A 700 User Controller will support one of the following
maximum configurations:
•
•
The following table gives the maximum capacities
available.
100 IP telephones and 48 ONS telephones with no
peripheral unit support.
a combination of IP, ONS, and DNI telephones (for
example, 75 IP telephones, 48 ONS telephones, and
25 DNI telephones on a peripheral unit).
250 IP telephones and 96 ONS telephones with no
peripheral unit support.
250 IP telephones and a 192 port peripheral unit with
a DTMF card installed.
a combination of IP, ONS, and DNI telephones (for
example, 100 IP telephones, 96 ONS telephones,
and 100 DNI telephones on a peripheral unit).
700 IP telephones and 96 ONS telephones with no
peripheral unit support.
700 IP telephones, 96 ONS telephones (connected
via ASUs) and three 192 port peripheral units with a
DTMF card installed.
Note: The controller will not support all of these capacities
at the same time. Refer to your Mitel Networks Sales
Engineer for specific information on how to configure a
3300 ICP system
229