Sending With The Relay Broadcast Button - Canon FAX-L800 User Manual

Sending with the RELAY BROADCAST Button

Follow this procedure to send the original document for a relay broadcast with
the RELAY BROADCAST button.
You can set only one destination.
1. Set the document on the fax. (Q6-3)
2. Open both One-touch Speed Dialling panels and press RELAY
RELAY BROADCAST
3. Dial the relay units.
ABC DEF
1 2 3
GHI JKL MNO
4
5 6
PQRS TUV WXYZ
8 9
7
0
9-10 Using a Relay Network
Perform the procedure to register a telephone number for One-touch or
Coded Speed Dialling. (Q4-6, 4-14) If the speed dialling buttons are already
set up, perform the procedure to change the One-touch or Coded Speed
Dialling settings. (Q4-6, 4-14)
When you do the speed dialling settings, turn on the OPTIONAL SETTING
feature and select TX TYPE. Select ORIG RELAY TX and then set the
ITU-T subaddress and password. (Q4-11, 4-19) Confirm that the other party
is set up properly to relay documents received from your fax. Your fax can
not confirm whether or not the other fax has been set up properly for
relaying a document sent from your fax.
Set the document resolution, contrast, and document type. (Q6-4)
You can also select a sender's name with the TTI SELECTOR. (Q6-6)
BROADCAST.
ORG RELAY TX
SELECT LOCATIONS
TEL=
Use regular dialling. (Q6-7)
-or-
Press a One-touch Speed Dialling button, or press CODED DIAL followed
by a three-digit code. (Q4-26, 4-28)
Chapter 9