Cleaning the Scanning Area
Periodically check the scanning glass, the white scanning strip, and rollers. If the
underside of the operation panel or the scanning glass is dirty, the documents you
send will look dirty.
1. Disconnect the power cord of the fax unit from its power source and remove
2. Use a soft, dry cloth to wipe clean the scanning glass, the white strip above,
15-22
Maintenance & Frequently Asked Questions
the document tray and open the operation panel. (Q15-19)
rollers and the area around the glass. Use a soft cloth that will not scratch the
scanning glass.
Rollers
Use the dry cloth to wipe clean the underside of the operation panel.
Use the dry cloth to wipe up paper dust around the rollers.
White strip
Scanning glass
Rollers
Chapter 15