Canon FAX-L800 User Manual page 329

2.CHANGE DATA
SET BOX #
PASSWORD
3.DELETE FILE
SET BOX #
PASSWORD
5.POLLING BOX
1.SETUP FILE
SET BOX #
1.FILE NAME
2.PASSWORD
3.SUBADDRESS
4.TX PASSWORD
5.ERASE AFTER TX
ON
OFF
2.CHANGE DATA
SET BOX #
PASSWORD
3.DELETE FILE
SET BOX #
PASSWORD
Chapter 16
Change the settings for preset polling/receiving.
Enter the number of the box you want to change.
Enter the password protecting the preset polling settings. You can
now change any of the settings listed in the table above (1.
SETUP FILE).
Delete the setting to poll at preset time.
Set the box number for the box you want to delete.
Enter the password of the file you want to delete.
Set up a polling box to store a document in your fax machine
until your fax machine is polled to send the document. (Q11-17)
Set up a polling box to hold a document until it is polled by and
sent to another fax machine.
Set a box number for the polling box.
Enter a file name (24 characters).
Enter a password to protect the polling box settings.
Enter a 20-digit (max.) standard ITU-T subaddress.
Enter a 20-digit (max.) standard ITU-T password.
Tell the fax machine how to handle the document after it is polled and sent.
Document is erased from the memory after it is polled and sent.
Document is not erased and remains in the memory after it is polled and sent.
Change the settings on the polling box. You can now change any
of the settings listed in the table above (1. SETUP FILE).
Set a box number you want to change.
Enter the password of the polling box you want to change. You
can now change any of the settings listed in the table above (1.
SETUP FILE).
Delete the polling box file.
Set the box number for the box you want to delete.
Enter the password of the polling box file you want to delete.
Summary of Important Settings 16-21