Using Memory Lock; Setting A Time And Password For Memory Lock - Canon FAX-L800 User Manual

Using Memory Lock

Normally a document prints as soon as you receive it. However, there may be
occasions when you want the fax to store all documents in the memory until you
are ready to print them. Locking the fax to receive and store all documents in the
memory is called memory lock.
You may want to turn memory lock on when the fax is left unattended at night or
over long holidays to prevent a large volume of printed documents from
collecting on the paper output tray. After you return to the office, you can review
the contents of the memory and then enter the memory lock password to print all
the documents stored in the memory.

Setting a Time and Password for Memory Lock

After memory lock is turned on, the fax will automatically enter and leave the
memory lock mode at times you specify. The documents received when the fax is
in the memory lock mode are stored in the memory until you unlock the memory
with a password and print them.
Follow the procedure below to define a memory lock password and set the times
for the fax to enter and leave the memory lock mode.
1. Open the MEMORY LOCK menu.
DATA REGISTRATION
SET
Chapter 13
Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
Press SET.
DATA REGISTRATION
1.USER SETTINGS
Press the search buttons until you see the display below.
DATA REGISTRATION
7.SYSTEM SETTINGS
Restricting Use of the Fax 13-15