Sending Documents At A Preset Time - Canon FAX-L800 User Manual

You must dial the second number within 5 seconds of dialling the first number.
All subsequent numbers must be dialled within 10 seconds. If you wait longer
than the timeout interval before dialling the next number, the fax will start
scanning the document. The timeout interval can be turned off. (Q16-11)
3. After you have entered all of the numbers, press START/SCAN.
Regardless of the order you used when dialling, the fax will send the document to
the locations you entered in this order: One-touch Speed Dialling numbers,
Coded Speed Dialling numbers, then regular dial numbers.

Sending Documents at a Preset Time

Follow this procedure to set a time for sending. This feature is called delayed
sending or timer sending. Use timer sending to store a document in the memory
and then have it sent at a later time when telephone rates are lower.
You can set up to five documents for delayed sending.
1. Set the document on the fax. (Q6-3)
Chapter 6
To cancel sequential broadcasting
To cancel a sequential broadcast, press STOP.
After CANCEL DURING TX/RX is displayed, press
cancelled.
Set the document resolution, contrast, and document type. (Q6-4)
You can also select a sender's name with the TTI SELECTOR. (Q6-6)
*
. All destinations are
Sending Documents 6-21