Sending With An Alternative Telephone Network - Canon FAX-L280 User Manual

¶ If you selected 131P in step 8:
9
Press Set twice.
10
Use the numeric buttons to enter
the ID code (max. 20 digits, no
pauses necessary).
11
Press Set.
12
Press Stop to return to standby
mode.

Sending With an Alternative Telephone Network

Follow this procedure to send using a registered long distance service:
1
Load the document, face down in
the ADF (
2
Open the one-touch speed dial panel.
3
Press M.
4
Use the numeric buttons to dial the
other party's fax number.
7-20
Sending Faxes
This ID code is given to you
by Cable and Wireless
Communications Limited (or
another alternative service).
If an ID code is already
registered, you will see a string
of asterisks ( @
@ @
. .
p. 4-3).
To adjust the resolution and
contrast, see pp. 7-2, 7-3.
You may be unable to send if
the memory used (shown in
the LCD) is close to 100%. Use
manual sending via the handset
instead ( p. 7-6).
If you enter the wrong number,
press Stop, then start again from
step 3.
) on the display.
@ @
. . .
ID CODE
Ex:
Ex:
123456789
REPORT SETTINGS
Ex:
15:00 FaxOnly
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
TEL=
Ex:
TEL=M416795111
Chapter 7
M