Table of Contents
Advertisement
6.DISPLAY LANGUAGE
7.TX START SPEED
8.RX START SPEED
9.RX PASSWORD
10.ENERGY SAVER
OFF
ON
11.PHONE NO. CHECK
OFF
ON
16-26
Summary of Important Settings
Select a language for prompts, messages, menus and printed reports.
The number of languages available may be different depending on
where you purchased your fax machine.
ENGLISH, FRENCH, SPANISH, GERMAN, DUTCH,
ITALIAN, SLOVENE, SWEDISH, FINNISH,
PORTUGUISE, DANISH, NORWEGIAN
Set the transmission speed for all documents you send.
Available settings: 14400, 9600, 7200, 4800, 2400 bps
Set the transmission speed for all documents you receive.
Available settings: 14400, 9600, 7200, 4800, 2400 bps
Set an RX password to match the ITU-T password of all incoming
document transmissions.
Enter a 20-digit (max.) ITU-T password. To receive a document, this
RX password must match the ITU-T password of the incoming
document.
After the RX password has been set, all incoming documents must
have a matching ITU-T password.
-or-
The document will be received regardless of this setting if the
incoming document has a matching subaddress and password for a
memory box.
Set the fax machine to reduce power consumption when not in use.
(Q3-19)
Fax machine does not power down even when it is idle.
The fax machine reduces power consumption after it has remained
idle for a specified length of time.
ENERGY SVR TIME
Allows you to prevent sending a document to an unwanted
destination. The number you dial is checked with connected number
and if they match, then the document is sent.
The number is not checked.
The fax uses the last six digits of the number you dial to match with
the last six digits of the other party's number registered on the
remote fax. If the numbers match the document is sent. Otherwise,
the document is not sent.
Set the idle time to elapse and trigger
reduced power consumption. (03 to 30
min.) Default is 03 min.
Chapter 16
Advertisement
Table of Contents
