Canon FAX-L800 User Manual page 318

3.AUTO REDIAL
ON
OFF
4.BATCH TX
ON
OFF
5.QUICK ON-LINE TX
ON
OFF
6.ERASE FAILED TX
OFF
ON
16-10 Summary of Important Settings
Select whether to perform automatic redial when the other line is
busy or no answer. (Q6-16)
Customize the redial operation.
1.REDIAL TIMES
2.REDIAL INTERVAL
3.TX ERROR RESEND
ON
OFF
After the first attempt at dialling fails, re-dialling is not attempted.
If there is more than one document waiting in the memory to be sent
to the same destination, after the timer goes off to send the first
document, then all documents are sent together in the same
transmission. With this feature the fax unit makes one phone call
instead of faxing each document with a separate phone call. This
feature saves time and money. (Q16-27)
Turn quick memory sending off and on. When ON the fax unit starts
sending the document while it is still being scanned. (Q6-11)
Determine what happens to the document in the memory if an error
occurs during its transmission.
Document remains in the memory after an error occurs during
sending.
Document is erased from the memory if an error occurs during
transmission.
From 01 to 10 times. (02TIMES)
From 02 to 99 minutes. (02MIN.)
Set redialling to handle error
transmissions.
Turn page resend off and on, and
select what pages to resend.
RESEND TX FROM
ERROR & 1ST PG
ERROR PAGE
ALL PAGES
No portion of a document is re-sent
after an error occurs.
Chapter 16