Canon FAX-L800 User Manual page 114

If you use One-touch or Coded Speed Dialling with the time out feature on, the
fax will pause 5 seconds before it starts scanning the document. (Q16-11)
3. To start scanning right away, press START/SCAN.
Transaction number
Other party's fax number and name
6-12 Sending Documents
If you use One-touch or Coded Speed Dialling, wait for the fax to start
scanning automatically.
The timeout feature can be turned off. (Q16-11)
You can start sending a document while it is being scanned into the memory.
When scanning a multi-page document if the telephone line is free, the unit
will call the other party after the first page is scanned. Once the connection is
made, the fax unit will begin to transmit the information while the remaining
pages are being scanned. This feature is called Quick-on-line TX and can be
turned off and on. (Q16-10)
When the fax sends a document, messages report the following information
about the transmission.
TRANSMIT
SCANNING DOC.
A transaction number is assigned to every document sent from your fax
starting with 0001 up to 4999. When the number 4999 is reached, numbering
will begin again from 0001.
26/12 '97 FRI 23:01
DIALLING
26/12 '97 FRI 23:01
26/12 '97 FRI 23:01
CALLING
26/12 '97 FRI 23:01
TX/RX NO.
26/12 '97 FRI 23:01
Displayed only if the other party's telephone number and name are registered
for the speed dialling button used to dial the number.
0031
P.001
123 4567
123 4567
0031
CANON CANADA
Transaction Number
Chapter 6