Table of Contents
Advertisement
3. Set the paper stack into the front paper cassette.
Before loading 500 sheets, divide the stack into approximately equal thirds about
1,5 cm thick. Then load each stack separately. The paper stack should not be
higher than the load limit marks (
) on the side of the paper cassette. Make
sure the stack is below the tabs at the front of the paper cassette.
Check the front corners of the stack and make sure they are below the tabs.
4. Gently insert the front paper cassette into the fax unit until you hear it click.
2-26
Setting Up
Chapter 2
Advertisement
Table of Contents
