Canon FAX-L800 User Manual page 178

2. Give the relay group a number from 00 to 99.
SET
SET
ABC DEF
1 2
3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
0
SET
Relay Group Setup Summary
The default settings, shown in bold, remain in effect unless you change them.
1.GROUP DIAL NAME
2.PASSWORD
3.SUBADDRESS
4.RX PASSWORD
9-4 Using a Relay Network
Press SET.
SETUP FILE
SET RLY TX GROUP# 00
Use the buttons on the numeric keypad to enter the two-digit relay group
number and press SET.
SETUP FILE
1.GROUP DIAL NAME
Use the search buttons to display all the items in the menu.
With the item displayed that you want to set, press SET. Then follow the
instructions in the table below to set up the relay group.
When you are finished, press STOP.
Enter a name for the relay group. The name can be up to 24-characters
long. Then press SET.
This is the four-digit password that protects the relay box settings you
are about to set up. After you set this password, you will have to enter
it every time you want to view or change these settings. Enter a four-
digit password and press SET.
This is the ITU-T subaddress. Enter a number up to 20 digits long (it
can include spaces and the symbols
When your fax is the relay unit, this ITU-T password must match the
ITU-T password of the document sent from the orginator in order for
your fax to receive the document. Otherwise, your fax will not receive
the document. Enter a number up to 20 digits long (it can include
spaces and the symbols
Name (24 characters)
0000-9999
*
20 digits ( # spaces)
*
and #).
*
20 digits ( # spaces)
*
and #).
Chapter 9