Canon FAX-L800 User Manual page 216

SET
3. Press SET.
4. If the other party's fax supports ITU-T subaddresses and passwords, use the
SET
ABC DEF
1 2 3
GHI JKL MNO
4
5 6
PQRS TUV WXYZ
7 8 9
0
SET
5. If you want to skip selecting a sender name, go on to the next step.
TTI SELECTOR
SET
6. Press SET. The fax starts scanning the document into the polling box.
11-18 Setting Up and Using Polling
SUBADDRESS
buttons on the numeric keypad to enter the subaddress for the polling box.
Then press SET.
-or-
If the other party's fax does not support ITU-T subaddresses and passwords,
just press SET.
-or-
If you want to select a sender name, press TTI SELECTOR until you see the
sender name you want to use. You can also use the search buttons to scroll up
and down the TTI list.
SENDER'S NAME
20 CANON FAX DIV.
POLLING TX
SCANNING DOC.
When another party polls your fax to receive a document stored in your
polling box, the document is sent if the following conditions are met:
If you entered both a subaddress and password when you created the
polling box, the subaddress and password of the other party's polling
request must match the subaddress and password for the polling box.
The password setting is optional. However, if you have registered a
password for the polling box, the other party's polling request must
contain a matching password.
If no password is registered for the document in the polling box and the
other party's polling request contains a password, then the document is
not sent.
6048
P.003
Chapter 11