Sending A Fax To Multiple Destinations (Sequential Broadcast); Sending A Fax At A Preset Time - Canon FAXPHONE L100 Basic Operation Manual

Sending a Fax to Multiple Destinations
(Sequential Broadcast)
You can send the same document to multiple recipients at once.
1 →
Place documents (
2
Switch to the Fax Mode (
3 ▲ ▼
Press [ ] or [ ] to highlight <Specify Destination>, and then press [OK].
Specify destination.
01/01/2011 12:52AM
Specify Destination
Confirm/Edit Destin
4 ▲ ▼
Press [ ] or [ ] to select the desired method for specifying destinations.
<Fax (New) >
<Address Book>
<Coded Dial>
5
Specify the destination, and then press [OK].
6
Repeat steps 2-4 to enter additional destinations as needed.
•
<Fax(New)> is available up to 10 destinations.
•
To confi rm or delete destinations, press [
Destination>, and tnen press [OK].
7
Press [ ] (Start).

Sending a Fax at a Preset Time

You can automatically send a pre-scanned fax at a preset time.
1 →
Place documents (
2
Switch to the Fax Mode (
3
Adjust the image quality of the documents as needed (
4 ▲ ▼
Press [ ] or [ ] to highlight <Delayed TX>, and then Press [OK].
Specify destination.
01/01/2011 12:52AM
Density: ±0
Delayed TX: Off
p.16).
→
p.13).
...
16
Enter the destination with the alphanumeric keys.
Select a destination from the address book.
Enter the numbers registered in the coded dialing
codes.
▲ ▼
] or [ ] to highlight <Confi rm/Edit
p.16).
→
p.13).
→
p.42).
47