Canon FAX-L800 User Manual page 230

Feature
Reduction of
document image
Report: Activity
Management Report
Report: Confidential
receiving
Report: Error
Report: Memory box
receiving
Report: Paper supply
for printed reports
Report: Receiving
Restricting use: DACs,
user access codes
Restricting use:
Stopping junk mail
Speed
Stamp
Tel/Fax switching
Telephone line
12-12 Other Special Features
Menu Item
RX REDUCTION
ACTIVITY REPORT
CONFID. RX REPORT
TX REPORT
REPORT WITH TX
IMAGE
MEMORY BOX
REPORT
PRINT REPORT
WHERE
RX REPORT
RESTRICTIVE CODES
RX RESTRICTION
TX START SPEED
RX START SPEED
TX STAMP
MAN/AUTO SWITCH
TEL LINE TYPE
Description of default
All documents are automatically reduced to fit on a sheet of
paper. You can also set the reduction rate to a fixed rate. You
can select one of the fixed rates to increase the amount of
reduction, or you can turn reduction off. (Q16-15)
An Activity Management Report prints after every 40
transactions. Transactions are listed in chronological order. You
can turn this feature off or set the fax to print an Activity
Management Report at the same time every day. You can also
change the format of the report by listing sending and receiving
transactions separately. (Q16-8)
A report is printed every time you receive a document in a
confidential mailbox. You can turn this feature off. (Q16-8)
If an error occurs while you are sending a document, an Error
TX report is printed automatically. (Q16-7)
A report is printed every time you receive a document in a
memory box. This feature can be turned off. (Q16-8)
The default setting if off (no paper cassette selected). You can
select the front or lower cassette (if you install the optional
cassette), or the side cassette, for the print report paper supply.
(Q16-8)
A report is not printed when you receive a fax. However, you
can set the fax to print a report every time you receive a
document or if an error occurs during reception. (Q16-7)
No password or access codes are set on the fax to restrict
sending documents, printing, or using the handset to make a
telephone call. All these functions can be restricted.
(Q13-5, 16-24)
The fax is set to receive all incoming documents. You can
restrict receiving to only numbers registered on your fax for
speed dialling. (Q13-14, 16-25)
The starting speed for all transactions is set for 14400 bps.
Slower settings are available. (Q16-26)
If you have the optional stamp feature on your fax machine, you
can turn the stamp feature on with this switch. The default
setting is off. (Q12-7, 16-11)
You can set a time interval for the fax to wait until it
automatically enters the document receive mode when the fax is
set for manual receiving. (Q16-12)
Your fax is set to operate on a rotary pulse telephone line.
(Q3-10, 16-6)
Chapter 12