Canon FAX-L800 User Manual page 298

MESSAGE
NO CONFID. TX
NO DOC. STORED
NO ORIGINAL RELAY TX
NO RX PAPER
NO TEL#
NOT AVAILABLE NOW
NOT FOUND,TRY AGAIN
PASSWORD POLL REJECT
PASSWORD TX REJECT
PRT ALT. PAPER SIZE?
YES=( * ) NO=(#)
REC. PAPER JAM
15-28 Maintenance & Frequently Asked Questions
The other party's fax unit may not support the use of confidential mailboxes.
Contact the other party and confirm whether or not they can set up confidential
mailboxes.
You may be using the wrong ITU-T subaddress/password. Contact the other party
and make sure you are using the correct subaddress/password.
The memory of the other party's fax unit may be full. Contact the other party and
request that they clear the memory on their fax unit.
You have tried to check the contents of the memory but no documents are currently
stored in the memory.
The other party's fax unit may not be able to function as a relay station, or it may
not be set up correctly to receive and relay documents. Contact the other party and
make sure it can function as a relay station.
If the fax unit can be set up as relay station, confirm that it is set up correctly for
relay transmissions. Make sure you have both registered the same ITU-T
subaddress/password.
If the memory of the other party's fax unit is full, it will not be able to receive and
relay documents. Ask them to clear part or all of the memory on their fax unit.
The other party's fax unit has run out of paper and can not receive your document.
Contact the other party and ask them to re-supply recording paper to their fax unit.
You have pressed a One-touch Speed Dialling button, or pressed CODED DIAL
followed by a 3-digit code, but no telephone number is registered. If you have
forgotten where the number is registered, use directory dial. (Q4-31) You can also
print a list of all numbers registered for speed dialling. (Q14-2)
You pressed a One-touch Speed Dialling, or pressed CODED DIAL followed by a
3-digit code, that is not registered for the feature you are trying to use.
The box number you specified does not exist. Try again with a different number.
You set up a polling box for polling sending with an ITU-T password, but the other
party's fax unit does not support use of an ITU-T password for polling receiving.
You attempted to send a document with an ITU-T password, but the other party's
fax unit does not support use of an ITU-T password for receiving.
The size of the available recording paper does not match the size of the document
waiting to be printed. If you do not mind printing on a different paper size, press
If you want to print the correct paper size, press STOP and install the correct size
paper. Then press START/SCAN.
Paper has jammed in the paper cassette or inside the printer. Clear the paper jam.
(Q15-3)
WHAT IT MEANS
* .
Chapter 15