Canon FAX-L800 User Manual page 351

Group dial
Group Dialling allows you to dial up to 199 previously registered One-touch
Speed Dialling or Coded Speed Dialling numbers together as a group. This
means you only need to press a One-touch speed dial button or the CODED
DIAL button followed by a three-digit code to dial a large group of numbers
automatically. You register each group of facsimile numbers for a One-touch or
Coded Speed Dialling button, so make sure a button is available before trying to
register Group Dialling. Once a group is defined, you can add or delete numbers
to/from the group.
Group number
List of all facsimiles to receive a relayed document. These are two-digit codes
between 00-99. The group number is registered on the facsimile with the relay
feature.
I
IN USE lamp
Lights when the telephone line is in use.
J
Jack
The telephone line receptacles on your wall and on the side of your fax unit used
to connect your fax machine to the telephone line and handset or extension
phone.
L
Long distance dialling
When dialling or registering long-distance numbers, you sometimes have to insert
a pause either within or after the telephone number. The destination and length
of the pause differ depending on the system. Contact your local authorized
Canon dealer or your local telephone company for further information if you
experience problems with long distance dialling.
M
Manual receiving
Use this setting if you have installed the optional handset kit and there is only
one line connected to your office which you use for both phone and fax
communication, and you want to monitor all incoming calls yourself. When you
hear the ringer, pick up the handset and answer the phone. If you hear a slow
beep, this means someone is trying to send you a facsimile transmission. Press
START/SCAN and hang up the handset to start receiving the document. You can
not receive documents if there is another document fed into the fax.
Glossary G-5