Adjusting the Length of a Pause
Follow this procedure to adjust the length of a pause entered within a number.
This procedure is effective only for adjusting the length pauses entered within
telephone numbers. The 10-second pause entered at the end of a number can not
be adjusted.
1. Open the TX SETTINGS menu.
DATA REGISTRATION
SET
2. Press SET.
Chapter 4
Keep in mind these important points about pauses:
A pause entered within a number (p) is 2 seconds long.
You can add consecutive pauses (pp) with the PAUSE button. Each
additional pause adds 2 seconds to the pause time.
You can change the length of a pause entered within a number. (Qbelow)
A pause at the end of a number (P) is 10 seconds long.
You may have to insert one or more pauses at the end of a number to dial
an overseas number.
Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
DATA REGISTRATION
1.USER SETTINGS
Press the search buttons until you see the display below.
DATA REGISTRATION
3.TX SETTINGS
Setting Up and Using Speed Dialling
4-3