Canon FAX-L800 User Manual page 229

Feature
Manual receiving with
extension phone
Memory receiving
Offhook alarm
Pause length
Printing: Continue
printing with toner
supply low
Printing: Footer on
printed documents
Printing: Print order
PROGRAM button
Quick-on-line TX
Receiving password
Redialling
Chapter 12
Menu Item
REMOTE RX
MEMORY RX
OFFHOOK ALARM
MID PAUSE SET
TONER SUPPLY LOW
RX PAGE FOOTER
PRINT IN ORDER
PROGRAM KEY
QUICK ON-LINE TX
RX PASSWORD
AUTO REDIAL
Description of default
To start receiving a fax manually by answering an extension
telephone connected to the fax, dial 25. You can change this
number or set the fax to start receiving after hanging up the
handset of the extension phone. (Q7-6, 16-12)
If paper or toner runs out while you are receiving a long
document the remainder of the document will be stored in the
memory until you can re-fill the paper cassette or replace the
toner cartridge. You can also set an alarm to sound when the fax
starts receiving a document in the memory. (Q16-13)
If the handset remains off the hook, an alarm will sound. The
volume of this alarm can be adjusted or it can be turned off.
(Q16-9)
A pause entered within a number is set for 2 seconds. You can
lengthen this pause up to 15 seconds. A pause entered at the
end of a number is fixed at 10 seconds and can not be adjusted.
(Q4-2, 16-9)
When the toner supply runs low, the fax saves the remainder of
the document into the memory. You can set the fax to continue
printing even after the toner runs low during printing. (Q16-16)
The fax will not print a footer on every document received
unless you turn this feature on. (Q16-13)
The fax prints all document pages in reverse order when you
remove them from the output tray. You can set the fax to print
all document pages in the order they were sent. (Q16-16)
If you press PROGRAM before you start a transmission, you
can tell the fax to print an activity report for the transmission.
This button can be programmed for other functions. (Q12-4,
16-5)
When you are scanning documents, the fax will start dialling and
sending before all pages are scanned. You can turn this feature
off. (Q16-10)
No receiving password is set until you set one. If the other party
regularly sends you documents with only an ITU-T password
with no subaddress, set the RX PASSWORD. (Q16-26)
If the other party's line is busy, the fax is set to perform two re-
dialling attempts at two minute intervals. You can increase the
number of re-dial attempts and the length of the interval
between attempts. If an error occurs during re-dialling, the fax is
set to re-send the first page of the document and the error page.
(Q6-16, 16-10)
Other Special Features 12-11