Sending With An Alternative Telephone Network - Canon FAX-L200? FAX-L280 User Manual

If you selected 131P in step 8:
9
Press Set twice.
10
Use the numeric buttons to enter the
ID code (max. 20 digits, no pauses
necessary).
• This ID code is given to you by Cable
and Wireless Communications Limited
(or another alternative service).
• If an ID code is already registered, you
will see a string of asterisks (AAAAA)
in the LCD.
11
Press Set.
12
Press Stop to return to standby mode.

Sending With an Alternative Telephone Network

Follow this procedure to send using a registered long distance service:
1
Load the document, face down in the
ADF (1 p. 4-3).
• To adjust the resolution and contrast,
see pp. 7-2, 7-3.
• You may be unable to send if the
memory used (shown in the LCD) is
close to 100%. Use manual sending via
the handset instead (1 p. 7-6).
2
Open the one-touch speed dial panel.
3
Press M.
4
Use the numeric buttons to dial the
other party's fax number.
• If you enter the wrong number, press
Stop, then start again from step 3.
7-20
Sending Faxes
ID CODE
Ex:
Ex:
123456789
REPORT SETTINGS
Ex:
15:00 FaxOnly
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
TEL=
Ex:
TEL= M416795111
M
Chapter 7