Sending A Confidential Document With The Confidential Mailbox Button - Canon FAX-L800 User Manual

Sending a Confidential Document with the Confidential
Mailbox Button
Note these points about sending a confidential document to a confidential
mailbox.
1. Set the document on the fax. (Q6-3)
2. Open both One-touch Speed Dialling panels and press CONFIDENTIAL
CONFIDENTIAL MAILBOX
SET
3. Press SET.
4. Use the buttons on the numeric keypad to dial the number. (Q6-7)
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
0
10-10 Using Confidential Mailboxes
You can dial only one telephone number.
If you frequently need to send a confidential document to more than one
location, register the number, subaddress, and password for One-touch or
Coded Speed Dialling so you can use multiple broadcasting. (Q4-6, 4-14)
If you use One-touch or Coded Speed Dialling to dial the number after you
perform the following operation, the transmission mode settings registered
for the speed dialling button are ignored.
The password setting is optional but required if the other party has set a
password on the other fax unit.
Set the document resolution, contrast, and document type. (Q6-4)
You can also select a sender's name with the TTI SELECTOR. (Q6-6)
MAILBOX.
CONFID. TX/RX
1.CONFIDENTIAL TX
CONFIDENTIAL TX
SELECT LOCATIONS
TEL=
-or-
Close the One-touch Speed Dialling panels and press a One-touch Speed
dialling button to dial the number, or press CODED DIAL and enter the
three-digit code. (Q4-26, 4-28)
Chapter 10