Turning The Stamp Feature On/Off - Canon FAX-L800 User Manual

Turning the Stamp Feature ON/OFF

If you have turned the TX STAMP setting ON, documents will be stamped
according to the above setting. If you have not turned on the TX STAMP feature
but you still want to occasionally stamp documents you scan for sending, or if you
have turned on the TX STAMP feature but you want to turn it off occasionally,
follow the procedure below.
1. Set the document on the fax. (Q6-3)
2. Open both One-touch Speed Dialling panels and press STAMP.
STAMP
( OPTION )
3. If you want to stamp document pages, press the search buttons until you see
SET
4. Press SET.
5. Close both One-touch Speed Dialling panels and send the document.
Chapter 12
Set the document resolution, contrast, and document type. (Q6-4)
You can also select a sender's name with the TTI SELECTOR button.
(Q6-6)
TX STAMP
ON.
TX STAMP
-or-
If you want to turn the stamp feature off, press the search buttons until you
see OFF.
TX STAMP
TEL=
OFF
ON
OFF
Other Special Features 12-9