Using Speed Dialling; Using One-Touch Speed Dialling - Canon FAX-L800 User Manual

Using Speed Dialling

Follow the procedures in this section to use speed dialling. The three speed
dialling methods are One-touch Speed Dialling, Coded Speed Dialling, and
Group Dialling. If you forget where a number is registered, you can find it and
dial it with directory dialling. (Q4-31)

Using One-touch Speed Dialling

Follow this procedure to start a transmission and send a document at the press of
a One-touch Speed Dialling button.
To use this feature, you must first register a telephone number for One-touch
Speed Dialling. (Q4-6)
1. Set the document on the fax. (Q6-3)
2. Press the One-touch Speed Dialling button where the telephone number you
01
72
4-26 Setting Up and Using Speed Dialling
Set the document resolution, contrast, and document type. (Q6-4)
You can also select a sender's name with the TTI SELECTOR. (Q6-6)
DOCUMENT READY
want to dial is registered.
If you do not see the number of the button you want, open the first or second
One-touch Speed Dialling panel to see more buttons. After 5 seconds, the fax
starts to send the document.
TEL=
01 CANON USA
TRANSMIT
SCANNING DOC.
You will see a series of brief, alternating messages that tell you the fax is
dialling, calling, then transmitting the document. The number being dialled,
name of the other party, and the transaction number of the document are also
displayed.
123 4567
0025
P.001
Chapter 4