Setting Up Polling Sending; Before You Can Be Polled To Send; Setting Up A Polling Box - Canon FAX-L800 User Manual

6. Press STOP to return to standby.

Setting Up Polling Sending

This section shows you how to set up your fax to store and hold a document until
it is polled by another fax to send it.

Before You Can Be Polled to Send

Before you set up your polling box, contact the parties who are going to poll your
fax to receive documents and confirm the following points:

Setting Up a Polling Box

Before you can use polling sending, you must create a polling box with the File
settings. The polling box holds the document in the memory until the other party
polls your fax to send the document.
1. Open the FILE SETTINGS menu.
DATA REGISTRATION
SET
Chapter 11
The other parties must know your ITU-T subaddress number.
If you are also using an ITU-T password for the polling box, they must also
know this password. This password setting is optional.
Your TX PASSWORD must match the ITU-T password attached when the
other party calls you. Confirm that the TX PASSWORD on your fax matches
the ITU-T password attached when the other party calls you.
If the other party's fax does not support ITU-T subaddress/password
transactions, you may be able to use the polling box #00.
Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
Press SET.
DATA REGISTRATION
1.USER SETTINGS
Setting Up and Using Polling 11-13