Canon FAX-L800 User Manual page 249

Memory Lock Setup Summary
The default settings, shown in bold, remain in effect unless you change them.
1.MEM LOCK PASSWORD
2.REPORT
3.TIME SETUP
Chapter 13
This password protects the memory lock settings. You must also
use this password to unlock the memory so you can print
documents stored in the memory. Use the buttons on the numeric
keypad to enter a four-digit password and press SET.
Set the fax to print reports or not. This setting affects only reports
that print automatically, such as Activity Reports for sending and
receiving, and Activity Management Reports.
OUTPUT NO
OUTPUT YES
Set the times for the fax to enter and leave the memory lock
mode. The time settings are optional. If you do not set the times,
you can use the MEMORY RECEPTION button to turn the
memory lock feature on and off.
OFF
ON
START TIME
EVERYDAY
SELECT DAYS
END TIME
EVERYDAY
SELECT DAYS
0000 to 9999
A report is not printed while in the
memory lock mode.
A report is printed while the fax is in
the memory lock mode.
Turns off the timer setup. You can
turn the memory lock mode on and
off with the MEMORY
RECEPTION button.
Turns on the timer setup. You can
still use the MEMORY
RECEPTION button to turn the
memory lock mode on and off.
Sets the time for the fax to enter the
memory lock mode.
Set the time in 24-hour format. Up to
5 starting times can be specified for
every day or each selected day.
Sets the time for the fax to leave the
memory lock mode.
Set the time in 24-hour format. Up to
5 starting times can be specified for
every day or each selected day.
Restricting Use of the Fax 13-17