Receiving A Document Manually With An Extension Telephone - Canon FAX-L800 User Manual

3. Press START/SCAN to start receiving the document. Then hang up the
Receiving a Document Manually with an Extension
Telephone
You can connect one extension telephone to the facsimile unit. (Q2-22) When
the telephone rings with the fax in the manual receive mode, you can use the
extension telephone to start receiving the document without walking over to the
fax machine. This is called remote receiving.
1. Make sure the extension telephone is connected properly. (Q2-22)
2. Check the operation panel and make sure the fax is in the manual receive
MANUAL RX
3. When the connected extension phone rings, pick up the handset.
You can change the number for the remote receiving ID (00 to 99), turn the
feature off, or set the fax to start receiving by just hanging up the handset. (Q7-6)
Chapter 7
handset by placing it back in the handset cradle. The fax will start to receive
the document.
The fax will make a beeping sound if the handset is not completely on its
handset cradle. This is called the offhook alarm. The offhook alarm can be
turned off. (Q16-6)
mode. The MANUAL RX indicator should be on. If it is off, press MANUAL
RX to turn on the indicator and switch the fax into the manual receive mode.
If you hear someone on the line, you can start talking to the other party.
-or-
If you hear a slow beep, dial 25 on the extension telephone and hang up to
start receiving the document.
If you have set the fax to receive by hanging up, after hearing a slow-beep
tone, hang up the handset.
Receiving Documents 7-7