Sending A Fax To Multiple Destinations (Sequential Broadcast); Sending A Fax At A Preset Time - Canon FAXPHONE L190 Basic Operation Manual

56
Sending a Fax to Multiple Destinations
(Sequential Broadcast)
You can send the same document to multiple recipients at once.
1
Place your documents (
2
Switch to the Fax mode (
3 ▲ ▼
Press [ ] or [ ] to select the desired method for specifying destinations.
<Address Book>
<Coded Dial>
<Specify Next
Destination (New)>
Specify destination.
01/01/2012 12:52AM
Address Book
Coded Dial
4
Specify the destination, and then press [OK].
5
Repeat steps 3-4 to enter additional destinations as needed.
•
<Specify Next Destination (New)> is available up to 10 destinations.
•
To confi rm or delete destinations, press [
<Confi rm/Edit Destination>, and then press [OK].
6
Press [ ] (Start).

Sending a Fax at a Preset Time

You can automatically send a pre-scanned fax at a preset time.
1
Place your documents (
2
Switch to the Fax mode (
3
Adjust the image quality of the documents as needed (
4 ▲ ▼
Press [ ] or [ ] to highlight <Delayed TX>, and then Press [OK].
Specify destination.
01/01/2011 12:52AM
Sharpness: ±0
Delayed TX: Off
→
p.19).
→
p.16).
Select a destination from the address book.
Enter the numbers registered in the coded dialing
codes.
Enter the destination with alphanumeric keys.
▲ ▼
] or [ ] to highlight
→
p.19).
→
p.16).
→
p.50).