Canon FAX-L800 User Manual page 348

C
CCITT/ITU-T
Formally known as CCITT, Consultative Committee for International Telegraph
and Telephone. CCITT has been replaced by the International
Telecommunications Unit-Telecommunications Sector (ITU-T), a committee
created to set international standards for telecommunications.
Coded Speed Dialling
Allows you to automatically dial a facsimile number by pressing only four
buttons, CODED DIAL and a three-digit code. You can register up to 128
facsimile numbers for Coded Speed Dialling. When you register the facsimile
number, you can also enter the receiving party's name, set the speed for the
transmission, and other useful features.
Confidential mailbox
Two-digit numbers between 00 and 99. If the number is a single digit, precede it
with a zero. The fax can have up to 70 confidential mailboxes for individual users.
Confidential mailbox password
Confidential mailbox passwords are four-digit decimal numbers between 0000 to
9999. To print a confidential document received in the memory, you must enter
your confidential mailbox password. Remember your password. You will need it
to print confidential documents received in the memory. Later if you want to
change your password, you must first enter the current password before you are
allowed to complete the procedure.
Confidential receiving
To receive a confidential document you must first create a mailbox and register
your confidential mailbox password. You use the password to print out
confidential documents that you receive in the memory. Confidential mailbox
passwords are four-digit decimal numbers between 0000 to 9999. When you
receive a confidential document in your mailbox, the fax prints a Confidential RX
Report.
Confidential sending
To use confidential sending, there are two ways. One is to first register the
procedure with a One-touch Speed Dialling button. After you register the
procedure, all you have to do is feed the document into the fax and press the
button. The other is to press CONFIDENTIAL MAILBOX button and dial.
D
Default
The fax is programmed in the factory with settings that we recommend. These
are known as factory default settings. You can customize your fax by
programming settings other than the factory default settings. For details, see
Chapter 16 of this User's Guide.
G-2 Glossary