Selecting A Sender Name - Canon FAX-L800 User Manual

Selecting a Sender Name

Follow this procedure to select one of the registered sender names.
1. Set the document on the fax and adjust the document guides to the width of
2. Dial the number.
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
9
7 8
0
3. Press TTI SELECTOR until the desired name appears in the display.
TTI SELECTOR
SET
4. Press SET.
5. Continue the procedure for the feature you want to use.
6-6 Sending Documents
Sender names are selected by pressing the TTI SELECTOR button.
This setting is optional. If you do not select a sender name before sending a
document, the registered unit name will be printed at the top of the
document in the sender information area. (Q3-12)
If you select a sender name before you send a document, it will replace the
unit name printed in the sender information area. (Q3-12)
Up to 99 sender names can be registered. At least one sender name must be
registered so you can use this feature. (Q3-17)
the document. (Q6-3)
Press the buttons on the numeric keypad to dial the number.
-or-
Press a One-touch Speed Dialling button to dial the number. (Q4-26)
-or-
Press CODED DIAL and a three-digit code to dial the number. (Q4-28)
-or-
Use directory dialling. (Q4-31)
-or-
Press TTI SELECTOR. Then press the search button until the desired name
appears in the display.
Chapter 6