Polling To Receive At A Preset Time - Canon FAX-L800 User Manual

7. Press START/SCAN to start polling the other faxes.

Polling to Receive at a Preset Time

Follow this procedure to set the fax to poll another fax at a preset time. Polling
faxes at preset times allows you to conduct document transactions later at night
when the telephone rates are lower.
Before you set up polling at a preset time, make sure you have performed the
following tasks:
1. Open the PRESET POLLING menu.
DATA REGISTRATION
SET
Chapter 11
If the other document is holding the document under a subaddress, your
subaddress must match the other party's subaddress.
If the other document is holding the document under both a subaddress
and password, then you must poll the fax with both a matching
subaddress and password.
The numbers you want to register for dialling must be registered for One-
touch or Coded Speed Dialling buttons. (Q4-6, 4-14)
When you register the One-touch or Coded Speed dialling button, you must
turn on OPTIONAL SETTINGS and set the TX TYPE for POLLING RX
when the other party set subaddress/password, you have to register an ITU-T
subaddress and/or password for the speed dialling button. (Q4-8, 4-16)
If you have to poll a number that you use regularly, you should register it
once again for another speed dialling button so you can set the ITU-T
subaddress and/or password to match the polling box of the other party's fax
and register the second number for preset polling.
Open both One-touch Speed Dialling panels. Then press DATA
REGISTRATION.
REGISTRATION
1.DATA REGISTRATION
Press SET.
DATA REGISTRATION
1.USER SETTINGS
Press the search buttons until you see the display below.
DATA REGISTRATION
6.FILE SETTINGS
Setting Up and Using Polling 11-5