Read This before Entering Telephone
Numbers
Read this section before you register numbers for speed dialling, especially if
your site has special dialling requirements like dialling through a PBX.
When you have to make calls to an outside line or an extension, you may have to
press R before you dial the outside line number or the extension number. Before
you can use the R button, you have to register it. (Q16-6)
Entering Pauses for Dialling
If your fax is connected to a switchboard or PBX (private branch exchange), you
may have to dial a number to connect to an outside line. The outside number
must also be registered with the fax number. The switching system may also
require that you insert a pause after the outside number. For further assistance,
contact your local authorized Canon dealer sales or service representative or
your local telephone company.
Follow this procedure to enter a pause during regular dialling or when registering
a number for a speed dialling button.
1. When you come to a step that asks you to enter a number for dialling, use the
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
9
7
8
0
2. To enter a pause between two numbers, open both One-touch Speed Dialling
PAUSE
3. To enter a pause at the end of a number, press PAUSE then press SET. The
PAUSE
SET
4-2
Setting Up and Using Speed Dialling
buttons on the numeric keypad to enter the number.
TELEPHONE NUMBER
TEL=03
panels and press PAUSE. After you enter the next number, the "P" changes
to a small "p".
TELEPHONE NUMBER
TEL=03P
pause at the end of a number appears as an upper case "P".
TELEPHONE NUMBER
TEL=03p123 4567P
Chapter 4