Can Not Copy Documents; Having Other Problems - Canon FAX-L800 User Manual

Can not Copy Documents?

Having Other Problems?

15-34 Maintenance & Frequently Asked Questions
Can not copy?
Is the toner cartridge out of toner?
Change the toner cartridge. (Q15-14)
Is the copied document reduced?
Are the document feed guides snug against the sides of the document that
you are copying?
Make sure the document feed guides are both against the sides of the
document in the automatic document feeder (ADF) before you start
copying. (Q5-3)
Are copied document cut at the margins?
Are the document guides on the side paper cassette set for the width of the
paper loaded in the cassette?
Adjust the document guides to the width of the paper loaded in the paper
cassette. (Q2-22)
Is sending and receiving documents too slow?
When sending, is the document mode set for SUPER FINE, FINE, or TEXT/
PHOTO?
If the indicator for SUPER FINE, FINE, or TEXT/PHOTO is on, press
RESOLUTION to select STANDARD, or press DOCUMENT TYPE to
select TEXT. (Q6-4)
Is your fax set for ECM receiving or sending?
Because the fax is constantly checking for errors during transmission, ECM
receiving and sending require more time. The fax is set to conduct all
transactions using ECM (error correction mode). If transmission speed
appears to be extremely slow, you may be able to speed up transmission
time by turning ECM off. (Q16-9, 16-12)
Can not get faxes from information services?
Is your fax connected to a rotary dial telephone line?
Even if your fax is connected to a rotary dial line, you can still get faxes
from information services that require tone dialling. Press TONE to
receive faxes from information services that require touch-tone telephone
lines for transmission. (Q12-3)
Chapter 15